Which of the following best describes the purpose of using subnets?
Subnets divide an IP network address into multiple network addresses.
Which of the following is NOT a reason to use subnets on a network?
Combine different media type on to the same subnet
Which of the following IPv6 addresses is equivalent to the IPv4 loopback address of 127.0.0.1?
::1
Which of the following describes an IPv6 address?
Eight Hexadecimal quartets128-bit address
Which of the following correctly describe the most common format for expressing IPv6 addresses? (Select two.)
32 numbers, grouped using colonsHexadecimal numbers
Which of the following are valid IPv6 addresses? Select all that apply.
141:0:0:0:15:0:0:16384:1319:7700:7631:446A:5511:8940:2552
Which of the following is a valid IPv6 address?
FEC0::AB:9007
Routers operate at what level of the Open System Interconnect model?
Network layer
You've decided to use a subnet mask of 255.
255.192.0 on the 172.17.0.0 network to create four separate subnets.
Which network IDs will be assigned to these subnets in this configuration? select two
You have been using SNMP on your network for monitoring and management. You are concerned about the security of this configuration.
What should you do?
Implement version 3 of SNMP
You want to implement a protocol on your network that allows computers to find the IP address of a host from a logical name. Which protocol should you implement?
DNS
Which of the following protocols allows hosts to exchange messages to indicate problems with packet delivery?
ICMP
You are configuring a network firewall to allow SMTP outbound e-mail traffic, and POP3 inbound e-mail traffic. Which of the following TCP/IP ports should you open on the firewall? (Select two.)
25110
Which port number is used by SNMP
161
Which of the following ports does FTP use to establish sessions and manage traffic?
20, 21
Using the "Netstat" command, you notice that a remote system has made a connection to your Windows Server 2008 system using TCP/IP port 21. Which of the following actions is the remote system most likely to be performing?
Downloading a file
To increase security on your company's internal network, the administrator has disabled as many ports as possible. Now, however, though you can browse the Internet, you are unable to perfume secure credit card transactions.
Which ports needs to be enabled to allows secure transaction?
443
Which of the following network services or protocols uses TCP/IP port 22?
SSH
Drag each IP port number on the left to its associated service on the right
SNMP SSH161 TCP AND UDP 22 TCP AND UDPTFTP SCP69 UDP 22 TCP AND UDPTELNET HTTPS23 TCP 443 TCP AND UDPHTTP FTP80 TCP 20 TCPSMTP POP325 TCP 110 TCP
Which two of the following lists accurately describes TCP and UDP?
UDP: connectionless, unreliable, unsequenced, low overhead.TCP: connection-oriented, reliable, sequenced, high overhead.
You are an application developer creating applications for a wide variety of customers. In which of two the following situations would you select a "connectionless protocol?
A company connects two network through an expensive WAN link. The communication media is reliable, but very expensive. They want to minimize connection times.
A gaming company wants to create a networked version of its latest game. Communication speed and reducing packet overhead are more important than error-free delivery.
You want to maintain tight security on your internal network so you restrict access to the network through certain port numbers. If you want to allow users to continue to use DNS, which port should you enable?
53
Your company's network provides HTTP, HTTPS, and SSH to remote employees.
Which ports must be opened on the firewall to allow this traffic to pass?
80, 433 and 22
Your network recently experienced a series of attacks aimed at the Telnet and FTP services. You have rewritten the security policy to abolish the unsecured services, and now you must secure the network using your firewall and routers. Which ports must be closed to prevent traffic directed to these two services?
23, 21
Which of the following is the main difference between DoS attack and a DDoS attack?
The DDoS attack uses zombie computers
An attacker sets up 100 drone computers that flood a DNS server with invalid requests. This is an example of which kind of attack?
DDoS
You suspect that an Xmas tree attack is occurring on a system. Which of the following could result if you do not stop the attack? (Select two.)
The system will unavailable to respond to legitimate requests.The threat agent will obtain information about open ports on the system.
You need to enumerate the devices on your network and display the configuration details of the network. Which of the following utilities should you use?
NMAP
An attacker is conducting passive reconnaissance on a targeted company. Which of the following could he be doing?
Browsing the organization's Website
Which type of active scan turns off all flags in a TCP header?
Null
Which of the following Denial of Service (DoS) attacks uses ICMP packets and will only be successful if the victim has less bandwidth than the attacker?
Ping flood
In which of the following Denial of Service (DoS) attacks does the victim's system rebuild invalid UDP packets, causing the system to crash or reboot?
Teardrop
A SYN packet is received by a server. The SYN packet has the exact same address for both the sender and receiver addresses, which is the address of the server. This is an example of what type of attack?
Land attack
Which of the following is a form of denial of service attack that subverts the TCP three-way handshake process by attempting to open numerous sessions on a victim server but intentionally falling to complete the session by not sending the final required packet?
SYN Flood
Which of the following is a form of denial of service attack uses spoofed ICMP packets to flood a victim with echo requests using a bounce/amplification network?
Smurf
A SYN attack or a SYN flood exploits or alters which element of the TCP three-way handshake?
ACK
When a Son flood is altered so that the SYN packets are spoofed in order to define the source and destination address as a single victim IP address, the attack is now called what?
Land attack
A surf attack requires all but which of the following elements to be implemented?
Padded cell
Which of the following best describes the ping of death?
An ICMP packet that is larger than 65,536 bytes
Which of the following is the best countermeasure against man-in-the-middle attacks?
IPSec
What is modified in the most common form of spoofing on a typical IP Packet?
Source address
Which type of Denial of Service (DoS) attack occurs when a name server receives malicious or misleading data that the incorrectly maps host names and IP Addresses?
DNS poisoning
Which of the following describes a man-in-the-middle attack?
A false server intercepts communications from a client by impersonating the intended server.
Capturing packets as they travel from one host to another with the intent of altering the contents of the packets is a form of which security concerns?
Man-in-the-middle attack
When the TCP/IP session state is manipulated so that a third party is able to insert alternate packets into the communications stream, what type of attack has occurred?
Hijacking
What is the goal of a TCP/IP hijacking attack?
Executing commands or accessing resources on a system the attacker does not otherwise have authorization to access
Which of the following is NOT a protection against session hijacking?
DHCP reservations
Which of the following is the most effective protection against IP packet spoofing on a private network?
Ingress and egress filters
While using the internet, you type the URL of one of your favorite sites in the browser. Instead of going to the correct site, however, the browser displays a completely different website. When you use the IP address of the Web server, the correct site displayed. Which type of attack has likely occurred.
DNS poisoning
Which of the following attacks tries to associate an incorrect MAC address with a known IP address?
ARP poisoning
What are the most common network traffic captured and used in a reply attack?
Authentication
When a malicious user captures authentication traffic and replays it against the network later, what is the security problem you are most concerned about?
An unauthorized user gained access to sensitive resources
A router on the border of your network detects a packet with a source address that is from an internal client but the packet was received in the Internet-facing interface. This is an example of what form of attack?
Spoofing
An attacker uses an exploit to push a modified host file to clients systems. This host file redirects traffic from legitimate tax preparation sites to malicious sites to gather personal and financial information. What kind of exploit has been used.
DNS poisoningPharming
Which of the following is a privately controlled portion of a network that is accessible to some specific external entities?
Extranet
You are the office manager of a small financial credit business. Your company handles personal, financial information for clients seeking small loans over the Internet. You are aware of your obligation to secure clients records, but budget is an issue. Which item would provide the best security for this situation?
All-in-one security appliance
You are implementing security at a local high school that is concerned with student accessing inappropriate material on the Internet from the library's computers. The students will use the computers to search the Internet for research paper content. The school budget is limited.
Which content filtering option would you choose?
Restrict content based on content categories
Match the application-aware network device on the right with the appropriate description on the left.
Application-aware proxyImproves application performanceApplication-aware firewallEnforces security rulesApplication-aware IDSAnalyzes network packets
Your company has a connection to the internet that allows users to access the internet. You also have a web server and an email server that you want to make available to the internet users. You want to created a DMZ for these two servers.
Which type of device should you use to create the DMZ?
Network-based firewall
You have a company network that is connected to the Internet. You want all users to have Internet access, but need to protect your private network and users. You also need to make a Web server publicly available to Internet users. Which solution should you use?
Use firewalls to create a DMZ.
Place the Web server inside the DMZ,and the private network behind the DMZ.
You have used firewalls to create a demilitarized zone. You have a Web server that needs to be accessible to Internet users. The Web server must communicate with a database server for retrieving product, customer, and order information. How should you place devices on the network to best protect the servers? (Select two.)
Put the database server on the private network.
Put the Web server inside the DMZ
Of the following security zones, which one can serve as a buffer network between a private secured network and the untrusted Internet?
DMZ
Which of the following is likely to be located in a DMZ?
FTP Server
Members of the Sales team use laptops to connect to the company network. While travelling, they connect their laptops to the Internet through airport and hotel networks. You are concerned that these computers will pick up viruses that could spread to your private network. You would like to implement a solution that prevents the laptops from connecting to your network unless anti-virus software and the latest operating system patches have been installed. Which solution should you use?
NAC
In which of the following situations would you most likely implement a demilitarized zone (DMZ)?
You want to protect public Web Server from attack.
Which of the following terms describes a network device that is exposed to attacks and has been hardened against those attacks?
Bastion or sacrificial host
Which of the following is a firewall function?
Packet filtering
Which of the following are characteristics of a circuit-level gateway? (Select two.)
Filter based on sessionsStateful
Which of the following are characteristics of a packet filtering firewall? (Select two.)
Stateless,Filter IP address and port
You want to install a firewall that can reject packets that are not part of an active session. Which type of firewall should you use?
Circuit-level
You provide Internet access for a local school.
You want to control Internet access based on user, and prevent access to specific URLs. Which type of firewall should you install?
Application level
Which of the following is the best device to deploy to protect your private network from a public untrusted network?
Firewall
You have been given a laptop to use for work. You connect the laptop to your company network, use it from home, and use it while travelling. You want to protect the laptop from Internet-based attacks.
Which solution should you use?
Host based firewall
You connect your computer to a wireless network available at the local library. You find that you can access all websites you want on the Internet expect for two. What might be causing the problem?
A proxy server is blocking access to the web sites.
Which of the following functions are performed by proxies? (Select two.)
Cache web pagesBlock employees from accessing certain Web sites.
Which of the following are true of a circuit proxy filter firewall? (Select two.)
Verifies sequencing of session packets.Operates at the Session Layer
Which of the following does router acting as a firewall use to control which packets are forwarded or dropped?
ACL
You have a router that is configured as a firewall. The router is a layer 3 device only.
Which of the following does the router use for identifying allowed or denied packets?
IP address
You have just installed a packet-filtering firewall on your network. What options will you be able to set on your firewall? Select all that apply.
Port numberSource address of a packetDestination address of a packet.
When designing a firewall, what is the recommended approach for opening and closing ports?
Close all ports; open only ports required by applications inside the DMZ
Which of the following firewall types can be a proxy between servers and clients? (Select two.)
Circuit proxy filtering firewallApplication layer firewall
You have a small network at home that is connected to the Internet. On your home network you have a server with the IP address of 192.168.55.
199/16. You have a single public IP address that is shared by all hosts on your private network. You want to configure the server as a Web server and allow Internet hosts to contact the server to browse a personal Web site. What should you use to allow access?
Static NAT
You are the network administrator for a small company that implements NAT to access the Internet. However, you recently acquired 5 servers that must be accessible from outside your network. Your ISP provided you with 5 additional registered IP addresses to support these new servers but you don't want the public to access this server directly.
You want to place these servers behind your firewall on the inside network yet still allow them to be accessible to the public from outside. Which method of NAT translation should you implement for these 5 servers?
Static
You want to connect your small company network to the Internet. Your ISP provides you with a single IP address that is to be shared between all hosts on your private network. You do not want external hosts to be able to initiate connection to internal hosts. What type of Network Address Translation (NAT) should you implement?
Dynamic
Which of the following is "not" one of the ranges of IP addresses defined in RFC 1918 that are commonly used behind a NAT server?
169.
254.0.0 - 169.254.255.
255
Which of the following networking devices or services prevents the use of IPSec in most cases?
NAT
You have a group of salesman who would like to access your private network through the Internet while they are traveling. You want to control access to the private network through a single server. Which solution should you implement?
VPN concentrator
A VPN is used primarily for what purpose?
Support secured communications over an untrusted network
Which VPN protocol typically employs IPSec as its data encryption mechanism?
L2TP
Which statement best describes IPSec when used in tunnel mode?
The entire data packet, including headers, is encapsulated
Which IPSec sub protocol provides data encryption?
ESP
Which of the following is "NOT" a VPN tunnel protocol?
RADIUS
Which is the best countermeasure for someone attempting to view your network traffic?
VPN
PPTP (Point to Point Tunneling Protocol) is quickly becoming obsolete because of what VPN protocol?
L2TP (Layer 2 Tunneling Protocol)
What is the primary use of tunneling?
Supporting private traffic through a public communication medium
In addition to Authentication Header (AH), IPSec is comprised of what other service?
Encapsulating Security Payload (ESP)
A salesperson in your organization spends most of her time traveling between customer sites. After a customer visit she must complete various managerial task.
Which key steps should you take when implementing this configuration? select two
Configure the VPN connection to use IPsecConfigure the browser to send HTTPS requests through the VPN connection
Which of the following is a valid security measure to protect email from viruses?
Use blockers on email gateways
Which of the following prevents access based on website ratings and classifications?
Content filter
Drag the web threat protection method on the left to the correct definition on the right.
Prevents visiting malicious web sitesWeb threat filteringPrevents outside attempts to access confidential informationAnti-phising softwareIdentifies and disposes of infected contentVirus blockersPrevents unwanted email from reaching your networkGateway email spam blockerprevents visiting restricted websitesURL content filtering
You are investigating the use of web site URL content filtering to prevent users from visiting certain web sites.
Which benefits are the result of implement this technology in your organization? choose two
Enforcement of the organizations internet usage policyAn increase in bandwidth availability
You have a company network with a single switch. All devices connect to the network through the switch. You want to control which devices will be able to connect to your network.
For devices that do not have the latest operating system patches, you want to prevent access to all network devices except for a special server that holds the patches that the computers need to download. Which of the following components will be part of your solution? (Select two.)
802.1x authenticationRemediation servers
Which step is required to configure a NAP on a Remote Desktop (RD) Gateway server?
Edit the properties for the server and select "Request clients to send a statement of health."
In a NAP system, what is the function of the System Health Validator?
Compare the statement of health submitted by the client to the health requirements
How does the IPsec NAP enforcement differ from other NAP enforcement methods?
Clients must be issues a valid certificate before a connection to the private network is allowed
Which of the following wireless security methods uses a common shared key configured on the wireless access point and all wireless clients?
WEP, WPA Personal, and WPA2 Personal
Which of the following offers the WEAKEST form of encryption for an 802.11 wireless network?
WEP
Which of the following features are supplied by WPA2 on a wireless network?
Encryption
You need to secure your wireless network. Which security protocol would be the best choice?
WPA2
You need to configure a wireless network. You want to use WPA2 Enterprise.
Which of the following components will be part of your design? select two
802.1xAES encryption
Which of the following locations will contribute the greatest amount of interference for a wireless access point? (Select two.)
Near backup generatorsNear cordless phones
You need to implement a wireless network link between two buildings on a college campus. A wired network has already been implement within each buildin.
The buildings are 100 meters apart. What type of wireless antennae should you use on each side of the link? select two
High gainParabolic
How does WPA2 Differ from WPA?
WPA2 uses AES for encryptionWPA uses TKIP
You need to configure the wireless network card to connect to your network at work. The connection should use a user name and password for authentication with AES encryption. What should you do?
Configure the connection to use WPA2-Enterprise.
Match the wireless networking security standards on the left to its associated characteristics on the right.
Short initialization vector makes key vulnerableWEPUses AES for encryptionWPA2Uses RC4WEPUses TKIPWPAUses CBC-MACWPA2Uses CCMPWPA2
You need to add security for your wireless network. You would like to use the most secure method. Which method should you implement?
WPA2
Which of the following is used on a wireless network to identify the network name?
SSID
Which of the following are true about Wi-Fi protected access 2 (WPA2)? select two
Uses AES for encryption and CBC-MAC integrityUpgrading from a network using WEP typically requires installing new hardware
WIMAX is an implementation of which IEEE committee?
802.16
You want to connect a laptop computer running windows 7 to a wireless network. What should you do?
Configure the connection with a preshared key and AES encryption
Your company security policy states that wireless networks are not to be used because of the potential security risk they present to your network. One day you find that an employee has connected a wireless access point to the network in his office. What type of security risk is this?
Rogue access point
Which of the following describes marks that attackers place outside a building to identify an open wireless network?
War chalking
The process of walking around an office building with an 802.
11 signal detector known as what?
War driving
Which of the following best describes Bluesnarfing?
Unauthorized viewing calendar, e-mails, and messages on a mobile device
Which of the following sends unsolicited business cards and messages to a Bluetooth device?
Bluejacking
Which of the following is the best protection to prevent attacks on mobile phone through the Bluetooth protocol?
Disable Bluetooth on phone
You are troubleshooting a wireless connectivity issue in a small office. You determine that the 2.4 GHz cordless phones used in the office are interfering with the wireless network transmissions. If the cordless phones are causing the interference, which of the following wireless standard could the network be using? (Select two.
)
802.11gBluetooth
Your organization uses an 802.11b wireless network. Recently, other tenants installed the following equipment in your building:A wireless television distribution system running at 2.4GhzA wireless phone system running at 5.8GhzA wireless phone system running at 900MhzAn 802.
11a wireless network running in the 5.725 - 5.850Ghz frequency rangeAn 802.11j wireless network running in the 4.9 - 5.
0Ghz frequency rangeSince this equipment was installed, your wireless network has been experiencing significant interference. Which system is to blame?
The wireless TV system.
Which of the following best describes an EVIL TWIN?
An access point that configured to mimic a valid access point to obtain logon credentials and other sensitive information
Network packet sniffing is often used to gain the information needed to conduct more specific and detailed attacks. Which of the following is the best defense against packet sniffing?
Encryption
Which of the following common network monitoring or diagnostic activity can be used as a passive malicious attack?
Sniffing
You are concerned that the wireless access points may have been deployed within your organization without authorization. What should you do? select two
Check the MAC addresses of the devices connected to your wired switchConduct a site survey
Match the malicious interference type on the right with the appropriate characteristic on the left.
Spark JammingRepeatedly blasts receiving equipment with high-intensinty, short-duration RF burst at a rapid paceRandom Noise JammingProduces RF signals using random amplitudes and FrequenciesRandom Pulse JammingUses Radio signal pulses of random amplitudes and frequencies
An attacker has hidden and NFC reader behind and NFC-based kiosk in and airport. What kind of attack has occurred
NFC relay attack
You are implementing a wireless network in a dentist office. The dentist practice is small, so you choose to use an inexpensive, consume-grade access point. what should you do to reduce risk?
Disable WPS in the access points configurations
Which of the following measures will make your wireless network invisible to the casual attacker performing war driving?
Disable SSID broadcast
Which remote access authentication protocol allows for the use of smart cards for authentication?
EAP
Which of the following do switches and wireless access points use to control access through the device?
MAC filtering
You want to implement 802.1 x authentications on your wireless network. Where would you configure passwords that are used for authentication?
On a RADIUS server
You are the wireless network administrator for your organization. As the size of the Organization has grown, you've decide to upgrade your wireless network to use 802.1x authentication instead of pre-shared keys.
Which of the following is TRUE concerning this implementation?
The system is vulnerable because LEAP is susceptible to dictionary attacks.
You are the wireless network administrator for your organization. As the size of the Organization has grown, you've decide to upgrade your wireless network to use 802.1x authentication instead of pre-shared keys.What should you do? select two
Configure all wireless access points with client certificates.Configure the RADIUS server with a server certificate
Which EAP implementation is most secure?
EAP-TLS
Which of the following features on a wireless network allows or rejects client connections based on the hardware address?
MAC address filtering
You've just finished installing a wireless access point for a client.
What should you do to prevent unauthorized users from accessing the access point (AP) configuration utility?
Change the administrative password on the AP.
You are concerned about sniffing attacks on your wireless network. Which of the following implementations offers the best countermeasure to sniffing?
WPA2 with AES
What is the LEAST secure place to locate an access point with an omni-directional antenna when creating a wireless cell?
Near a window
What purpose does a wireless site survey server? (Choose two.)
To identify the coverage of area and preferred placement of access points.To identify existing or potential sources of interference,
You need to place a wireless access point in your two-story building. While trying to avoid interference, which of the following is the best location for the access point?
in the top floor
You are designing a wireless network implementation for a small business.
The business deals with sensitive customer information, so data emanation must be reduced as much as possible. place antenna type to location.
A-DIRECTIONALB-DIRECTIONALC-OMNIDIRECTIONALD-DIRECTIONALE-DIRECTIONALF-DIRECTIONALG-DIRECTIONAL
The owner of a hotel has contracted with you to implement a wireless network to provide internet access for guest. what should you do?
Implement a captive portal