Six Sigma DMAIC Project Report Template Comments ? The following template provides guidelines for preparing a Six Sigma written certification project report.

Subheadings and length of each section will obviously vary based on your findings and writing style. For a complete sample report using the template, see “Sample Project Report”. ? The information in your report should follow the Six-Sigma Problem Solving Methodology DMAIC. This includes a description of the project, key points in the problem-solving process, and detailed support for your conclusions and any recommendations.Reports should be approximately 5-10 single-spaced pages (excluding appendices), including tables and figures. Black Belt reports/projects may be more comprehensive and thus longer.

? Some general guidelines for grammar and format are provided for your reference at the end. ? Some information contained in this template is repetitive across sections. However, since different audiences will read your report to various degrees of depth, we believe that it is essential to repeat certain information.Ultimately, you should produce a high quality, professionally-presented report that has sufficient detail to help other Six Sigma practitioners utilize and build upon your project findings. Title of Report Submitted to: Name, Title Department/Organization Address (optional) Prepared by: Name, Title Department/Organization Address (optional) Date Submitted Note: Do not put a page number on your title page. Begin numbering the pages with the Executive Summary.

Executive Summary The Executive Summary presents the major information contained in the report.Its readers are typically managers who need a broad understanding of the project and how it fits into a coherent whole. These readers do not need or want a detailed understanding of the various steps taken to complete your project. Therefore, the Executive Summary allows readers to learn the gist of the report without reading the entire document, to determine whether the report is relevant to their needs, or to get an overview before focusing on the details. We consider writing a concise (typically one-page) and comprehensive executive summary a critical element of a Six Sigma project report.The Executive Summary should NOT include terms, abbreviations, or symbols unfamiliar to the reader.

Readers should understand the content of the Executive Summary without reading the rest of the report. The Executive Summary should include a problem statement, summary of approach used, and major project findings and recommendations. • Problem Statement / Description • Concisely describe the problem (few sentences). • Identify the time period of the problem • Quantify the degree of the problem and its impact on the business (if possible).Example: During the past year, the average # of incoming calls with complaints per card-year has increased by 20%. These additional calls have resulted in additional staffing and facility costs of ~$100K per year.

This project identifies several reasons for this increase in calls and provides solutions to reduce them. • Summary of Problem-Solving Approach (methods used to solve problem) • Example: We formed a cross-functional problem solving team from the following departments. This team used the Six Sigma DMAIC problem solving process to identify opportunities for improvement.First, we conducted a qualitative process analysis to identify potential causes for the number of complaint calls.

Next, we set up a data collection plan at two call centers. Here, we conducted an observational study over a two-month period of various key input variables versus the number of complaint calls to determine the major causes of our increase in calls. From this study, we were able to identify several recommendations for our call centers. • Major project results or findings and recommendations -- should include KEY information.Example: A major finding of our project is that the majority of our increases in complaint calls (about 70%) are the result of either confusion with using our new ATM screen menus or delays in providing customers new ATM cards in the case of lost or stolen cards. Our analysis resulted in several recommendations to our ATM format menus.

In addition, this project has lead to the implementation of a new internal procedure to send customers new ATM cards to replace lost or stolen cards.In an initial verification study of these new procedures, we have been able to significantly reduce complaint calls resulting in a projected savings of $50,000 for reduction in call center staff resources. 1. 0 Improvement Opportunity: Define Phase Discuss the problem you examined. Explain how you identified your specific Six Sigma project.

You might possibly integrate visuals and data summaries using tools such as a Pareto chart or a summary report of current performance for either a manufacturing or transactional process.Some topics that should be included in this section are: 1. Discussion of the process being examined and problem addressed o Include a written description of the process and the potential performance issues. This is a good place for a process map, flow chart, or perhaps a SIPOC diagram. o See problem statement discussed in executive summary for suggestions on writing an effective problem statement. Note: this section likely will repeat information from executive summary.

2.Identification of key measures used to evaluate the success of your project o Examples: DPM, DPMO, costs, quality yield, error rates, processing or order-filling time or % conformance, machine cycle time, # complaints, etc. 1. 3 Discussion of project scope o Note: include discussion of scope if you chose to limit your project to a particular part of a larger problem statement or due to timing constraints or span of influence. 2. 0 Current State of the Process: Measure Phase 2.

1 Current Performance Level Summarize current performance levels.Note: you typically need to describe the data set used to summarize performance by discussing how the data were collected, what was the sample size, the period of data collection, whether the data were measured, and if there were any measurement system issues). Integrate visuals such as tables and figures to summarize performance. Some metrics and analysis tools that might be used here: • Quantify Current State of Key Y Variable(s) [i.

e. , Project Metrics], summarize performance using one or more of the following: o quality yields (% conformance or % defective) process capability summary (either as DPM/DPMO measure, or using process capability indices), o descriptive statistics summary tables, (note: if project examines a Y variable that involves continuous data (e. g. , length, time, etc.

) to specification limits, you may want to discuss if your problem appears related to a mean off target and/or a variation issue. ) o Note: Do not present long, bulky data set tables in the main report, place them in appendices to the report. ) • Distribution/Data Patterns of Key Outputs (identify distribution of performance and/or discuss any data patterns in the current state data).Some tools to use here are: o histograms, o Pareto charts, o Statistical process control charts and/or run (time trend) charts.

o If possible, identify if problem is a chronic and/or a sporadic problem. • Measurement System Analysis (Optional) o Discuss the validity of your measurement data either qualitatively (in words) or quantitatively using tools such as a Gage Repeatability and Reproducibility Study, Repeated Measurement Analysis Results, and/or Gage Accuracy Study. If appropriate, discuss the strengths and limitations of your data collection method. 2. Identification of Key Variables. • Identify Key Product/Process Output Variables (KPOV’s) examined and/or list potential Key Product Input Variables (KPIV’s).

• Sample Tools that might be used here include P-Diagram or a Cause-Effect Diagram. Or, simply include a summary paragraph or list of potential variables. 2. 3 Identification of Target Performance Levels or Project Goals. • Target Performance Levels (Required) - identify the desired performance levels or improvement amounts of your performance metric (e. g.

, Reduce DPM level from 35,000 to 1000 DPM, or reduce reject rate from 10% to “